Commercial washroom plumbing
Washroom plumbing for offices, shops, restaurants and other commercial buildings, including barrier-free fixtures.
For businesses
Plumbing for hair salons, barbershops, nail salons and spas, from shampoo bowls and pedicure stations to hot water.
A salon asks more of its plumbing than most small shops. Every shampoo bowl or backwash unit needs its own hot and cold supply, a drain and a vent, and each pedicure station needs water and a drain at the chair. Hair causes most of the trouble: it binds with soap and product into clogs that slow every bowl on the line, so a hair trap at each bowl, emptied often, keeps it out of the drain before it reaches the main line.
Hot water is the other pressure point. Back-to-back washes at several bowls can empty a water heater sized for an office, so the heater has to match the number of stations and the busiest hours. Opening a salon in a leased unit usually means bringing water, drains and vents to stations the space was never planned for, which is planned like any tenant fit-out, with the permit and inspections that come with it.
We look at how many shampoo bowls, pedicure chairs and sinks you have or plan, and where their water, drain and vent connections can run.
We work out how much hot water the stations use at the busiest time, and whether the water heater keeps up or needs replacing.
We run supply, drain and vent lines to each station, fit hair traps where they help, and clear or replace drains that keep clogging.
We test the new lines for leaks, and work that needs a permit is inspected before the space opens.
A hair trap at each shampoo bowl catches most of it before it reaches the drain line, as long as it is emptied often. A drain that is already slow usually needs the line cleared, since hair that gets past binds with soap and product further down.
It depends on how many bowls run at once and for how long. A heater sized for an office or a small shop can run out at peak times, so the number of stations and the busiest hours are the place to start.
Most units can be fitted out for a salon, but some are simpler than others. A unit with water and a drain close to where the stations will go is easier to plumb than one where the floor has to be cut to run new drains.
Based in Kitchener, working across Waterloo, Cambridge, Guelph and Stratford.